* _*1024 Supervised Paradox GPRS/IP Modules*_ : High-speed supervision for up to 1024 Paradox control panels using PCS100 GPRS edition or IP100 Intern

Plug-In RS485 Converter Converts serial output to RS485, allowing a PCS250 communication module to be moved up to 300 meters from the Paradox alarm control panel for better range Connects directly to the Paradox alarm control panel Only compatible when reporting via GSM to the Monitoring Center

* Desktop application that emulates the IPR512 GPRS/IP Monitoring Receiver, with unlimited # of accounts * Converts incoming IP signal from a Parado

* SSL support for sending secured emails via a secure sockets layer; a protocol for encrypting information over the Internet * HTTPS support for imp

LTE/4G/3G/2G GPRS/GSM communication module, Paradox PCS265 is 4G communication solutions for Paradox control panels, They can be used as a backup to the traditional telephone line or as the first communication channel for the security system when there is no other type of connectivity 4G (3.75G)/3G/2G reporting to IPR512 GPRS/ IP monitoring receiver or IPRS-7 IP/ GPRS software IP/ GPRS receiver

Using cellular networks, the PCS250G reports to the monitoring station’s automation software via GPRS, ensuring that all communication is fast, reliable, and stable. The PCS250G can be used as a backup to a traditional landline, or as a primary communicator where no landline is available. It also adds remote home control capabilities to a system, allowing you to arm/disarm with a simple text message (SMS). Feel safe by taking control of your system, wherever you are. With its contemporary design, and a modern hi-tech finish, the PCS250G GPRS Communicator Module enables Paradox systems to be remotely controlled, continuously monitored, and reliably connected at all times.

Compact, sleek design Report events to the IPR512 GPRS/IP Monitoring Receiver and/or IPRS-7 IP/GPRS PC Receiver Software Report via text message (up to 16 cell phone numbers) Control panel communication supervision End-user can arm or disarm the system by sending a text message (SMS) to the PCS250 Send pre-recorded voice messages to up to 8 telephone numbers to report alarms using the optional VDMP3 Paradox Plug-in Voice Module (GSM mode) Simple installation with 4-wire serial connection Optional rod antenna can be installed up to 18m (60ft) from the module using optional antenna cable extensions depending on the local signal strength 128-bit (MDS) and 256-bit (AES) encryption (GPRS mode) Increase the distance between the panel and the PCS250 module with an RS485 link (GSM mode only via e-bus). A CVT485 module must be added to the panel in order to accomplish this Report via GSM (CID, SIA) Compatibility EVO48 and EVO192 panels V2.02 K641 and K641R keypads V1.51 or higher SP series V3.42 with K32LCD keypads V1.22 E55 panels V3.0 (labels to be programmed via Winload) E65 panels V2.1 (labels to be programmed via Winload) • MG series V4.0 or higher with K32LCD keypads V1.22 or higher

Connection cable of IP150+ with Paradox GPRS communicators

• Dial up to 5 telephone numbers to report a burglar, panic or fire alarm using prerecorded messages • Arm/disarm the system remotely via telephone

Extension antenna for GPRS 14 and PCS250-P2P, PCS250-G03, 2m.

ANTKIT antenna extension 2mAntenna extensions help avoid attenuation of the GSM/GPRS signal in the guarded object due to peculiarities in the construction of the building or weak coverage in this area of the mobile operator, By moving the antenna of the GSM/GPRS module, a better signal level is provided and better conditions for site security are provided.